Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 386
deny icmp, deny icmp (IPv6
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 386 highlights
- vlan - (Optional) VLAN number, from 1 to 4093. Default Command Mode Usage Information Example Disabled MAC-ACL The no version of this command removes the filter. OS10(config)# mac access-list macacl OS10(conf-mac-acl)# deny any any cos 7 OS10(conf-mac-acl)# deny any any vlan 2 Supported Releases 10.2.0E or later deny icmp Configures a filter to drop all or specific internet control message protocol (ICMP) messages. Syntax Parameters deny icmp [A.B.C.D | A.B.C.D/x | any | host ip-address] [[A.B.C.D | A.B.C.D/x | any | host ip-address] [capture | dscp value | fragment] • A.B.C.D - Enter the IP address in hexadecimal format separated by colons. • A.B.C.D/x - Enter the number of bits to match to the IP address. • any - (Optional) Set all routes subject to the filter. - capture - (Optional) Capture packets the filter processes. - dscp value - (Optional) Deny a packet based on the DSCP values, from 0 to 63. - fragment - (Optional) Use ACLs to control packet fragments. • host ip-address - (Optional) Enter the IP address to use a host address only. Default Command Mode Usage Information Example Not configured IPV4-ACL The no version of this command removes the filter. OS10(config)# ip access-list egress OS10(conf-ipv4-acl)# deny icmp any any capture session 1 Supported Releases 10.2.0E or later deny icmp (IPv6) Configures a filter to drop all or specific ICMP messages. Syntax deny icmp [A::B | A::B/x | any | host ipv6-address] [A::B | A::B/x | any | host ipv6-address] [capture | dscp value | fragment] Parameters • A::B - Enter the IPv6 address in hexadecimal format separated by colons. • A::B/x - Enter the number of bits to match to the IPv6 address. • any - (Optional) Set all routes which are subject to the filter: - capture - (Optional) Capture packets the filter processes. - dscp value - (Optional) Deny a packet based on the DSCP values, from 0 to 63. 386 Access Control Lists
![](/manual_guide/products/dell-powerswitch-s5148fon-os10-enterprise-edition-user-guide-release-1032er2-5350827/386.png)