Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 578

To set the severity to the default level, use the no logging console severity command. The default severity level is log-notice. Parameters severity - Set the minimum logging severity level: • log-emerg - Set to unusable. • log-alert - Set to immediate action is needed. • log-crit - Set to critical conditions. • log-err - Set to error conditions. • log-warning - Set to warning conditions. • log-notice - Set to normal but significant conditions (default). • log-info - Set to informational messages. • log-debug - Set to debug messages. Default Command Mode Usage Information Example Log-notice CONFIGURATION None OS10(config)# logging console disable Example (Enable) OS10(config)# logging console enable Example (Severity) OS10(config)# logging console severity log-warning Supported Releases 10.2.0E or later logging enable Enables system logging. Syntax logging enable To disable the logging capability, use the no logging enable command. Parameters Default Command Mode Usage Information Example None Enabled CONFIGURATION The no version of this command disables all logging. OS10(config)# logging enable Supported Releases 10.2.0E or later logging log-file Disables, enables, or sets the minimum severity level for logging to the logfile. Syntax logging log-file {disable | enable | severity} 578 Troubleshoot OS10