Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 580
logging server, show logging
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 580 highlights
Example OS10(config)# logging monitor severity log-info Supported Releases 10.2.0E or later logging server Configures the remote syslog server. Syntax logging server {hostname | ipv4-address | ipv6-address} [severity severitylevel] Parameters • hostname | ipv4-address | ipv6-address - (Optional) Enter either the hostname or IPv4/IPv6 address of the logging server. • vrf management - (Optional) Configure the logging server for the management VRF instance. • severity-level - (Optional) Set the logging threshold severity: - log-emerg - System as unusable. - log-alert - Immediate action is needed. - log-crit - Critical conditions. - log-err - Error conditions. - log-warning - Warning conditions. - log-notice - Normal but significant conditions (default). - log-info - Informational messages. - log-debug - Debug messages. Defaults Command Mode Usage Information Example Log-notice CONFIGURATION Starting from 10.3.0E or later, this command supports IPv6 addresses. The previous versions support only IPv4 addresses. The no version of this command deletes the syslog server. OS10(config)# logging server dell.com severity log-info OS10(config)# logging server fda8:6c3:ce53:a890::2 Supported Releases 10.2.0E or later show logging Displays system logging messages by log-file, process-names, or summary. Syntax show logging {log-file [process-name | line-numbers] | process-names} Parameters • process-name - (Optional) Enter the process-name to use as a filter in syslog messages. • line-numbers - (Optional) Enter the number of lines to include in the logging messages (1 to 65535). Default Command Mode Usage Information None EXEC The output from this command is the /var/log/eventlog file. 580 Troubleshoot OS10