Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 360
radius-server host, radius-server key
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 360 highlights
Command Mode Usage Information Example CONFIGURATION The no version of this command disables the public key authentication. OS10(config)# ip ssh server pubkey-authentication Supported Releases 10.3.0E or later radius-server host Configures a RADIUS authentication server. Syntax Parameters radius-server host {hostname | ip-address} [auth-port port-number | key authentication-key] • hostname - Enter the host name of the RADIUS server. • ip-address - Enter the IPv4 (A.B.C.D) or IPv6 (x:x:x:x::x) address of the RADIUS server. • auth-port port-number - (Optional) Enter the UDP port number used on the server for authentication (0 to 65535, default 1812) • key authentication-key - (Optional) Enter the authentication key used to authenticate the switch on the server (up to 42 characters; default radius_secure). Default Command Mode Usage Information Example Not configured CONFIGURATION The authentication key must match the key configured on the RADIUS server. Configure global settings for the timeout and retransmit attempts allowed on RADIUS servers by using the radius-server retransmit and radius-server timeout commands. The no version of this command removes a RADIUS server configuration. OS10(config)# radius-server host 1.5.6.4 key secret1 Supported Releases 10.2.0E or later radius-server key Configures the authentication key the RADIUS server uses. Syntax radius-server key value Parameters value - Enter the authentication key value known both to the RADIUS client and server. Default Not configured Command Mode CONFIGURATION Usage Information The no version of this command resets the value to the default. Example OS10(config)# radius-server key md5 Supported Releases 10.2.0E or later 360 System management