Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 39

Up Time: 1 day 05:34:06 User admin logged out at session 10 admin@OS10:/opt/dell/os10/bin$ • Use the -B option along with a batch file to execute a series of commands. configure terminal router bgp 100 neighbor 100.1.1.1 remote-as 104 no shutdown Execute the batch file. admin@OS10:/opt/dell/os10/bin$ clish -B ~/batch_cfg.txt New user admin logged in at session 15 Verify the BGP configuration executed by the batch file. admin@OS10:/opt/dell/os10/bin$ clish -c "show running-configuration bgp" New user admin logged in at session 16 ! router bgp 100 ! neighbor 100.1.1.1 remote-as 104 no shutdown admin@OS10:/opt/dell/os10/bin$ User admin logged out at session 16 SSH commands You can execute commands remotely using an SSH session. This is supported only for show commands. • Enter the show command along with SSH. $ ssh admin@ip-address show-command $ ssh [email protected] "show version" [email protected]'s password: Dell EMC Networking OS10 Enterprise Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved. OS Version: 10.3.2E(X) Build Version: 10.3.2E(X.433) Build Time: 2018-01-03T11:57:14-0800 System Type: S5148F-ON Architecture: x86_64 Up Time: 1 day 05:34:06 OS9 environment commands You can configure commands in an OS9 environment by using the feature config-os9-style command. The current release supports VLAN tagging and port-channel grouping commands. • VLAN Interface mode - tagged - no tagged - untagged Getting Started 39