Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 442
Control-plane policy-map, System policy-map, Ingress traffic classification, Ingress
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 442 highlights
Control-plane policy-map You can apply the policies created to the control-plane. 1 Enter CONTROL-PLANE configuration mode from CONFIGURATION mode. control-plane 2 Apply the service policy, and create a name for the policy-map in CONTROL-PLANE mode. service-policy input policy-map-name Attach policy-map to control-plane OS10(config)# control-plane OS10(conf-control-plane)# service-policy input p1 View control-plane service policy OS10(conf-control-plane)# do show qos control-plane Service-policy (Input)(control-plane): p1 System policy-map The policies applied in the SYSTEM-QOS mode are applicable to all of the interfaces in the system. NOTE: If both the interface-level and system-level policy-map are available at the same time, the interface-level policy-map gets priority. • Enter SYSTEM-QOS mode from CONFIGURATION mode. system qos • Configure an input service-policy, and create a name for the policy-map in SYSTEM-QOS mode. service-policy {[input type {qos}] | [output type {queuing}]} policy-map-name Attach policy-map to system OS10(conf-sys-qos)# service-policy input type qos p1 OS10(conf-sys-qos)# service-policy output type queuing p2 View service policies OS10(conf-sys-qos)# do show qos system Service-policy (input)(qos): p1 Service-policy (output)(queuing): p2 Ingress traffic classification By default, OS10 does not honor 802.1 p priorities on ingress traffic. Honoring 802.1p means assigning a traffic-class ID implicitly based on incoming packets. You can use the trust command only under the ingress QoS policy-type, and under the reserved class-map name class-trust to enable honoring of 802.1p priorities on ingress traffic. 1 Create a policy-map, and configure a name for the policy-map in CONFIGURATION mode. policy-map type qos policy-map-name 2 Associate the class-map named class-trust with the policy-map in POLICY-MAP-CLASS-MAP mode. class class-trust 3 Honor 802.1p (dot1p) priorities on ingress traffic in POLICY-MAP-CLASS-MAP mode. trust {dot1p} [fallback] 442 Quality of service