Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 188

Default Command Mode Usage Information Example • vlan vlan-id -Enter a VLAN ID as the destination (1 to 4093). remote-vlan vlan-id-Enter a remote VLAN ID as the destination for RPM monitoring session (1 to 4093). Not configured MONITOR-SESSION The no version of this command resets the value to the default. OS10(conf-mon-local-10)# destination interface port-channel 10 OS10(conf-mon-rspan-source-3)# destination remote-vlan 20 Supported Releases 10.2.0E or later monitor session Creates a session for monitoring traffic with port monitoring. Syntax monitor session session-id type [local | rspan-source] Parameters • session-id - Enter a monitor session ID (1 to 18). • local - (Optional) Enter a local monitoring session. • rspan-source - (Optional) Enter a remote monitoring session. Default Command Mode Usage Information Example local CONFIGURATION The no version of this command removes the monitor session. OS10(config)# monitor session 1 OS10(conf-mon-local-1)# Example (RPM) OS10(config)# monitor session 5 type rspan-source OS10(conf-mon-rspan-source-5)# Supported Releases 10.2.0E or later show monitor session Displays information about a monitoring session. Syntax show monitor session {session-id | all} Parameters • session-id - Enter the session ID number (1 to 18). • all - View all monitoring sessions. Default Command Mode Usage Information All EXEC In the State field, true indicates that the port is enabled. In the Reason field, Is UP indicates that hardware resources are allocated . 188 Layer 2