Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R2 - Page 464
match cos, match dscp
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 464 highlights
Usage Information Example In a match-any class, you can enter multiple match criteria. In a match-all class, if the match case is access-group, no other match criteria is allowed. If you attach the access-list to class-map type control-plane, the access-list ignores the permit and deny keywords. OS10(conf-cmap-qos)# match ip access-group name ag1 Supported Releases 10.2.0E or later match cos Matches a cost of service (CoS) value to L2 dot1p packets. Syntax match [not] cos cos-value Parameters • cos-value - Enter a CoS value (0 to 7). • not - Enter not to cancel the match criteria. Default Command Modes Usage Information Example Not configured CLASS-MAP You cannot have two match statements with the same filter-type. If you enter two match statements with the same filter-type, the second statement overwrites the first statement. OS10(conf-cmap-qos)# match cos 3 Supported Releases 10.2.0E or later match dscp Configures a DSCP value as a match criteria for a class-map. Syntax Parameters match [not] {ip | ipv6 | ip-any } dscp [dscp-list | dscp-list] • not - (Optional) Enter to cancel a previously applied match criteria. • ip - Enter to use IPv4 protocol as the match protocol. • ipv6 - Enter to use IPv6 protocol as the match protocol. • ip-any - Enter to use both IPv4 and IPv6 as the match protocol. • dscp dscp-list | dscp-list - Enter a DSCP value in single numbers, comma separated, or a hyphenated range (0 to 63). Default Command Mode Usage Information Example Not configured CLASS-MAP You cannot enter two match statements with the same filter-type. If you enter two match statements with the same filter-type, the second statement overwrites the first statement. The match-all option in a class-map does not support ip-any. Select either ip or IPv6 for the match-all criteria. If you select ip-any, you cannot select ip or ipv6 for the same filter type. OS10(conf-cmap-qos)# match ip-any dscp 17-20 Supported Releases 10.2.0E or later 464 Quality of service
![](/manual_guide/products/dell-powerswitch-s5148fon-os10-enterprise-edition-user-guide-release-1032er2-5350827/464.png)