HP 2500c Service Manual - Page 178
Power Knob, Steps 3-14, Installing the Power, Replacement of Power Knob.
View all HP 2500c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Replacement of Parts Installing the Main Case Step 1. Pull the paper knob out and place the new main case down. Step 2. Replace the two screws at the top of the main case. Step 3. Reconnect the LCD and LED connectors. Caution! Please note that the colors of the wiring of the LCD connector are different from that of the LED connector. When connecting, please check that the sequences of the colors of the connectors match on both ends. Step 4. Replace the remaining components for the Power Knob (refer to Steps 3-14 of Installing the Power Knob from Replacement of Power Knob.) 7-28 Removal and Replacement of Parts (without Calibration)
Removal and Replacement of Parts (without Calibration)
7-28
Replacement of Parts
Installing the Main Case
Step 1.
Pull the paper knob out and place the new main case down.
Step 2.
Replace the two screws at the top of the main case.
Step 3.
Reconnect the LCD and LED connectors.
Caution!
Please note that the colors of the wiring of the LCD connector are different from that of the LED
connector.
When connecting, please check that the sequences of the colors of the connectors match on
both ends.
Step 4.
Replace the remaining components for the
Power Knob
(refer to
Steps 3-14
of
Installing the Power
Knob
from
Replacement of Power Knob.
)