HP 2500c Service Manual - Page 74

Using the Control Panel I/O Menu Item IN JOB TIMEOUT= 15 OUT JOB TIMEOUT= 15 I/O CHANNEL TIMEOUT= 120 Value 5 to 300 Explanation Selects the amount of time (in seconds) that the printer will wait within a print job before ending it. When the data from a print job is not completely sent to the printer, the printer will wait for this specified number of seconds. After that, it will abort the job and carry on to process the next print job. 0 to 300 Press [ Value ] once to change the setting by increments of 1 or hold down [ Value ] to scroll through the settings. Selects the amount of time (in seconds) that the printer will wait for the next print job before switching to another port. This is useful especially when your printer is connected to two different ports, such as the parallel port and the network port. 0 to 300 Press [ Value ] once to change the setting by increments of 1 or hold down [ Value ] to scroll through the settings. Selects the amount of time (in seconds) that the printer will receive data from a port before switching to the next port. When the printer is connected to different ports with simultaneous data being sent from these ports, the printer will be able to toggle between ports so that jobs sent through all ports will be given equal priority. Press [ Value ] once to change the setting by increments of 1 or hold down [ Value ] to scroll through the settings. 2-16 Operating Overview