HP 2500c Service Manual - Page 197
Replacement of Absorbers, Ink Supply Station, Removing the Ink Supply, Station, Replace of Ink
View all HP 2500c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Replacement of Parts Replacement of Absorbers You will be removing the absorbers from the printer and installing new absorbers. Removing the Absorbers Step 1. Remove the Ink Supply Station (refer to procedures in Removing the Ink Supply Station from Replace of Ink Supply Station). Step 2. Slide the ink carriage mechanism along the carriage rod to the left under the top cover. This will expose three screws, previously concealed under the ink carriage mechanism, that secure the service station. Step 3. Unscrew the three screws in the order shown on the chassis. Step 4. Remove the service station by sliding it out. Be careful of connecting cables when removing the service station. Step 5. Disconnect the service station connector. Removal and Replacement of Parts (without Calibration) 7-47