HP CM3530 HP Color LaserJet CM3530 Series - Software Technical Reference (exte - Page 181

Print on both sides (manually) - fuser

Page 181 highlights

All paper types support the smart duplexing feature, except for paper types that cannot be printed on both sides (such as labels, transparencies, and envelopes) and the following paper types: ● Prepunched ● Preprinted ● Letterhead ● Cardstock When the paper type is set to Unspecified, the smart duplexing feature is disabled. To achieve the best print quality when printing on the second side of the page, the product needs to make adjustments to its print modes. When you select a paper type, you are, in effect, instructing the product to use a group of settings (such as fuser temperature and print speed) to print the paper with the best possible quality. This group of settings is known as print mode. For the best print quality, a different print mode is used with each paper type. Print-mode adjustments for the second side of a duplexed page are automatic. Print on both sides (manually) ● Manually Print on 2nd Side is not selected by default. Select the Print on both sides (manually) check box to print on the second side of the paper when the paper type and/or paper size is not supported by the duplexing unit. The CM3530 MFP always comes with a duplexing unit installed, so manual duplexing is only needed for the following paper sizes and types: Sizes: Statement 4x6 5x8 A6 B6 Double Postcard (JIS) Types: Cardstock 176-220g NOTE: Print on both sides (manually) is only available for the sizes and types shown above because they are not supported by the duplexing unit. To manually print on both sides for any sizes and types (except transparencies, envelopes, and labels), the duplex unit (for 2-sided printing) must be set to Not Installed (under Device Settings) to disable automatic duplexing. Otherwise, only the sizes and types shown above will display the Print on both sides (manually) check box in the driver. Cardstock paper can be manually printed on the second side, but no change occurs to the print mode. Transparencies and labels should never be manually printed on the second side. To print a multiple-page document, follow these steps: 1. Select the Print on both sides (Manually) check box. 2. Click OK. The even-numbered pages of the document print. ENWW Finishing tab features 161

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294

All paper types support the smart duplexing feature, except for paper types that cannot be printed on
both sides (such as labels, transparencies, and envelopes) and the following paper types:
Prepunched
Preprinted
Letterhead
Cardstock
When the paper type is set to
Unspecified
, the smart duplexing feature is disabled.
To achieve the best print quality when printing on the second side of the page, the product needs to
make adjustments to its print modes. When you select a paper type, you are, in effect, instructing the
product to use a group of settings (such as fuser temperature and print speed) to print the paper with
the best possible quality. This group of settings is known as print mode. For the best print quality, a
different print mode is used with each paper type. Print-mode adjustments for the second side of a
duplexed page are automatic.
Print on both sides (manually)
Manually Print on 2nd Side
is
not
selected by default.
Select the
Print on both sides (manually)
check box to print on the second side of the paper
when the paper type and/or paper size is not supported by the duplexing unit. The CM3530 MFP
always comes with a duplexing unit installed, so manual duplexing is only needed for the following
paper sizes and types:
Sizes:
Statement
4x6
5x8
A6
B6
Double Postcard (JIS)
Types:
Cardstock 176–220g
NOTE:
Print on both sides (manually
) is only available for the sizes and types shown above because
they are not supported by the duplexing unit. To manually print on both sides for any sizes and types
(except transparencies, envelopes, and labels), the duplex unit (for 2-sided printing) must be set to
Not
Installed
(under
Device Settings
) to disable automatic duplexing. Otherwise, only the sizes and types
shown above will display the
Print on both sides (manually)
check box in the driver.
Cardstock paper can be manually printed on the second side, but no change occurs to the print mode.
Transparencies and labels should
never
be manually printed on the second side.
To print a multiple-page document, follow these steps:
1.
Select the
Print on both sides (Manually)
check box.
2.
Click
OK
. The even-numbered pages of the document print.
ENWW
Finishing tab features
161