HP CM3530 HP Color LaserJet CM3530 Series - Software Technical Reference (exte - Page 203

mopier mode can be created, controlled, managed, and finished from the computer, which eliminates the extra step of using a photocopier. The product supports the transmit-once mopying feature when the Mopier Mode: setting on the Device Settings tab is Enabled. When you use the HP PCL 6 Print Driver, mopying is performed in one of two ways: either through the software or through the product hardware. When Mopier Mode: is enabled, mopying takes place through the product hardware. One copy of a multiple-page print job is transmitted once through the network to the product, together with a printer job language (PJL) command directing the product to make the specified number of copies. When you disable mopying, you are not necessarily disabling multiple collated copies, which the driver can still perform through the software rather than the product hardware (the mopying path that is disabled when you change the Mopier Mode: setting to Disabled). However, a multiple-copy print job that is sent when the mopier is disabled loses the advantage of transmitting the print job once, because the job is sent through the network for each collated copy. Mopier mode and collation Mopying and collating print jobs are independent but closely related functions. Mopying, the ability to send original print jobs to the product, is performed by the print driver. Collating can be controlled by either the print driver or the document software program. The mopying mode is selected by default in the driver and can be disabled by changing the Mopier Mode: setting on the Device Settings tab to Disabled. Control collation through the print driver by selecting or clearing the Collated check box on the Advanced tab. Click Copy Count under the Paper Output setting. You can clear the check box, which is available only when the Copy Count option is set to more than 1 copy, to allow the software program to control collation. To receive uncollated multiple copies of a print job, you must clear the Collated check box and make sure that the software program collation feature is not selected. The following table shows the relation between Mopier Mode: settings and collation settings in the software program and the driver. The first three columns show the settings; the last column, Expected result, shows how a three-page print job would appear. Table 4-4 Driver Mopier Mode: and collation settings Mopier Mode Application collation Driver collation Expected result Disabled Not selected Not selected 3 copies uncollated Disabled Not selected Selected 3 copies uncollated Disabled Selected Not selected 3 copies collated Disabled Selected Selected 3 copies collated Enabled Not selected Not selected 3 copies uncollated Enabled Not selected Selected 3 copies uncollated Enabled Selected Not selected 3 copies collated Enabled Selected Selected 3 copies collated ENWW Device Settings tab features 183