HP CM3530 HP Color LaserJet CM3530 Series - Software Technical Reference (exte - Page 182

3. The printer driver displays the following message on the Windows PC that initiates the print job. When the device control panel shows the Manually feed output stack message, insert the stack of paper (on which even-numbered pages have been printed) as indicated in the following figure. The stack in Tray 1 should be face up with the top of the page feeding first. Figure 4-15 Print on Both Sides Instructions Flip pages up Use the Flip pages up check box to specify the duplex-binding option. By default, the Flip pages up check box is not available. It is available only when Print on both sides is selected. The following table demonstrates the results of selecting this check box, depending on the paper orientation selected on the Finishing tab. Table 4-3 Page orientation Orientation (Finishing tab) Flip pages up selected Flip pages up not selected Portrait Short-edge binding Long-edge binding Landscape Long-edge binding Short-edge binding When Print on both sides is selected, the document preview image changes to show a spiral binding along either the left edge or the top edge of the page. In addition, a folded-over corner appears in the lower-right portion of the preview image, indicating that printing occurs on the back side. An arrow on the folded-over corner points in the direction that the pages would be flipped if they were bound together. Short-edge binding is for print jobs with pages that read by flipping over like the pages of a calendar. Long-edge binding is for print jobs with pages that read by turning like the pages of a book. Booklet layout The Booklet layout: drop-down menu, visible when Print on both sides is selected, offers choices that are based on the current paper size. The default setting for the Booklet layout: drop-down menu 162 Chapter 4 HP PCL 6 Print Driver for Windows ENWW