HP CM3530 HP Color LaserJet CM3530 Series - Software Technical Reference (exte - Page 259
Remote firmware update by using FTP through a browser
UPC - 884420196501
View all HP CM3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
Remote firmware update by using FTP through a browser Complete the following steps to update the product firmware by using file transfer protocol (FTP) through a browser on Windows operating systems: 1. Make note of the TCP/IP address on the EIO-Jetdirect page. The EIO-Jetdirect page is the second page of the configuration page printout. To print a configuration page, see Print the configuration page on page 236. 2. Open a browser window. 3. In the address line of the browser, type ftp://, where is the TCP/ IP address of the product. For example, if the TCP/IP address is 192.168.0.90, type ftp:// 192.168.0.90. 4. Press Enter. 5. Locate the downloaded .RFU file for the product. 6. Drag and drop the .RFU file onto the PORT icon or onto any open space in the browser window. NOTE: If the PORT icon does not appear as a folder name, you might have to enable folder viewing for FTP sites in the Web browser. In Microsoft Internet Explorer, use the following procedure to enable the folder view: a. Select Tools, select Internet Options, and then select the Advanced tab. b. Select the Enable folder view for FTP sites. c. Click OK to save the setting. The download process begins and the firmware is updated on the product. This can take several minutes. Let the process finish without further interaction with the product or the computer. The messages described in Messages during the firmware update on page 243 appear on the controlpanel. NOTE: The product automatically turns off and then on again to activate the update; this can happen more than once. At the end of the update process, the READY message appears on the control-panel. Do not turn off the product or interfere with the update until you see this message. 7. When the product is in a Ready state, print a configuration page and verify that the firmware version has changed. Also, print the Menu map and check for settings changes. Remote firmware update by using FTP on a network connection Complete the following steps to update the product firmware by using file transfer protocol (FTP) through a network connection on Windows operating systems: 1. Make note of the TCP/IP address on the HP Embedded Jetdirect page, which is on the second page of the configuration page printout. To print a configuration page, see Print the configuration page on page 236. NOTE: Before connecting to the product, make sure that the product is in a Ready state. Also make sure that any error messages are cleared from the control-panel display. 2. Open a command prompt or an MS-DOS command prompt on the computer. 3. Type ftp://, where is the TCP/IP address of the product. For example, if the TCP/IP address is 192.168.0.90, type ftp://192.168.0.90. ENWW Remote firmware updates 239