HP Photosmart C6300 User Guide - Page 155
Solution 3: Check if the cables are connected
View all HP Photosmart C6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Chapter 14 If this did not solve the issue, try the next solution. Solution 2: Check the active network connection Solution: Make sure you have an active network connection. To make sure your network connection is active 1. If the connections are secure, turn off the power on the product, and then turn it on again. Press the product button on the control panel to turn the product off, and press it again to turn the product on. Also, turn off the power on your router or hub, and then turn it on again. 2. Check the cable connections from the product to your gateway, router, or hub to ensure connections are secure. 3. Make sure the product is connected to the network with a CAT-5 Ethernet cable. Cause: You did not have an active network connection. If this did not solve the issue, try the next solution. Solution 3: Check if the cables are connected Solution: Check the following cables to ensure they are connected properly: • Cables between the product and the hub or router • Cables between the hub or router and your computer • Cables to and from your modem or product Internet connection (if applicable) • Cables between the product and the hub or router • Cables between the hub or router and your computer • Cables to and from your modem or product Internet connection (if applicable) Cause: The cables were not connected properly. If this did not solve the issue, try the next solution. Troubleshooting Solution 4: Temporarily disable anti-virus or anti-spyware applications Solution: Uninstall the product software, and then reboot your computer. Temporarily disable anti-virus or anti-spyware applications, and then reinstall the product software. You can re-enable your anti-virus or anti-spyware applications after installation is complete. If you see firewall pop-up messages, you must always accept or allow the pop-up messages. If the screen still appears, try uninstalling the product software, rebooting your computer, and temporarily disable your firewall before reinstalling the product software. You can re-enable your firewall application after installation is complete. If you still see firewall pop-up messages, you must always accept or allow the pop-up messages. For more information, see the documentation provided with the firewall software. Cause: A firewall, anti-virus, or anti-spyware application was preventing the product from accessing your computer. 152 Troubleshooting