HP Photosmart C6300 User Guide - Page 28
Set up the HP All-in-One on a wired (Ethernet) network, What you need for a wired network
View all HP Photosmart C6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Set up the HP All-in-One on a wired (Ethernet) network This section describes how to connect the HP All-in-One to a router, switch, or hub using an Ethernet cable and how to install the HP Photosmart Software for a network connection. This is known as a wired or Ethernet network. Finish setup To set up the HP All-in-One on a wired network, you need to do the following: First, collect all of the required materials. Next, connect to a wired network. Finally, install the software. See this section: "What you need for a wired network" on page 25 "Connect the HP All-in-One to the network" on page 26 "Install the software for a network connection" on page 34 What you need for a wired network Before you connect the HP All-in-One to a network, make sure you have all of the required materials. ❑ A functional Ethernet network that includes a router, switch, or hub with an Ethernet port. ❑ CAT-5 Ethernet cable. Although standard Ethernet cables look similar to standard telephone cables, they are not interchangeable. There is a different number of wires in each one, and each has a different connector. An Ethernet cable connector (also called an RJ-45 Connect to a computer 25