IBM 621410U Hardware Maintenance Manual - Page 104

Handle cap, Unplug the workstation.

Get IBM 621410U - IntelliStation E - Pro 6214 PDF manuals and user guides
UPC - 087944665854
View all IBM 621410U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 104 highlights

4. Use side cutters to sever the fan's four rubber extensions on the outside of the chassis. 5. Pull the fan away from the chassis. 6. To install the rear fan, reverse the previous steps. Note: After guiding the four rubber extensions through the apertures on the chassis, use needle-nosed pliers to pull the extensions firmly through. Handle cap Note: This illustration is for reference only; your hardware may differ. Note: Read "Before you begin" on page 41 and the safety notices at "Safety notices (multi-lingual translations)" on page 135. To remove the handle cap, do the following: 1. Power-off the workstation, if it is on. 2. Unplug the workstation. 3. Use a flathead screwdriver to gently press in and down on the tabs located on the interior side wall of the handle. 4. Lift up on the handle cap to separate it from the handle support. 96 Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
4.
Use side cutters to sever the fan
’
s four rubber extensions on the outside of the
chassis.
5.
Pull the fan away from the chassis.
6.
To install the rear fan, reverse the previous steps.
Note:
After guiding the four rubber extensions through the apertures on the
chassis, use needle-nosed pliers to pull the extensions firmly through.
Handle cap
Note:
This illustration is for reference only; your hardware may differ.
Note:
Read
“
Before you begin
”
on page 41 and the safety notices at
“
Safety notices
(multi-lingual translations)
”
on page 135.
To remove the handle cap, do the following:
1.
Power-off the workstation, if it is on.
2.
Unplug the workstation.
3.
Use a flathead screwdriver to gently press in and down on the tabs located on
the interior side wall of the handle.
4.
Lift up on the handle cap to separate it from the handle support.
96
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214