IBM 621410U Hardware Maintenance Manual - Page 119
Tape Cartridge, if user executed the Read/Write Tape Drive test XXX = 256, DIMM Location J1-J4
UPC - 087944665854
View all IBM 621410U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Error Code/Symptom FRU/Action 201-XXX-0NN (Failed Memory test, see "IBM Setup Utility main menu choices" on page 32.) NN = DIMM location. 1. DIMM Location J1-J4 2. Memory card 201-XXX-999 1. See error text for failing DIMMs (Multiple DIMM failure, see error text.) 202-XXX-001 1. Microprocessor CPU 1 (Failed System Cache test) 206-XXX-000 (Failed Diskette Drive test) 1. Cable 2. Diskette Drive 3. System Board 215-XXX-000 (Failed IDE CD-ROM test) 1. CD-ROM Drive Cables 2. CD-ROM Drive 3. System Board 217-198-XXX (Could not establish drive parameters) 1. Check cable and termination 2. SCSI backplane 3. Fixed disk 217-XXX-000 1. Fixed Disk 1 (Failed BIOS Fixed Disk test) Note: If RAID is configured, the fixed disk number refers to the RAID logical array. 217-XXX-001 1. Fixed Disk 2 (Failed BIOS Fixed Disk test) Note: If RAID is configured, the fixed disk number refers to the RAID logical array. 217-XXX-002 1. Fixed Disk 3 (Failed BIOS Fixed Disk test) Note: If RAID is configured, the fixed disk number refers to the RAID logical array. 264-XXX-0NN (NN = SCSI ID of failing Tape Drive) 1. Tape Cartridge, if user executed the Read/Write Tape Drive test (XXX = 256) 2. SCSI or power cable connected to the tape drive with SCSI ID NN 3. Tape drive with SCSI ID NN - refer to Help and Service Information appendix of tape drive's User Guide. 4. I/O Legacy Board or SCSI Controller - run SCSI Controller diagnostic to determine of SCSI bus is functioning properly. 264-XXX-999 1. See error messages/text in the PC Doctor error log for detailed information on (Errors on multiple tape each individual tape drive error. drives, see error text for more info) Symptom-to-FRU index 111