IBM 621410U Hardware Maintenance Manual - Page 38
Replace the cover and connect the cables., the battery clip holds the battery securely.
UPC - 087944665854
View all IBM 621410U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Do the following to replace the battery: 1. Follow any special handling and installation instructions supplied with the replacement battery. 2. Turn off the computer and all attached devices. Disconnect all external cables and power cords; then remove the computer cover. 3. Do the following to remove the battery: a. Use one fingernail to press the top of the battery clip away from the battery. The battery pops up when released. b. Use your thumb and index finger to lift the battery from the socket. 4. Do the following to insert the new battery: a. Tilt the battery so that you can insert it into the socket on the side opposite the battery clip. b. Press the battery down into the socket until it clicks into place. Make sure the battery clip holds the battery securely. 5. Replace the cover and connect the cables. 6. Turn on the system. 7. Start the Configuration/Setup Utility program and set configuration parameters. v Set the system date and time. v Set passwords if necessary. v Save the configuration. 30 Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214