IBM 621410U Hardware Maintenance Manual - Page 55
Adapter considerations, The system scans the AGP slot and PCI expansion slots 1 through 3 to assign
UPC - 087944665854
View all IBM 621410U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
The following illustration shows the location of expansion slots on the system board. Microprocessor (J10TD2) DIMM 2 DIMM 1 AGP (J5E1) PCI 1 PCI 2 PCI 3 Battery SCSI LED (J35) Adapter considerations: Before you install adapters, review the following: v Locate the documentation that comes with the adapter and follow those instructions in addition to the instructions provided in this chapter. If you need to change the switch or jumper settings on the adapter, follow the instructions that come with the adapter. v You can install low-profile adapters in all three PCI slots. v The computer supports 5.0 V and universal PCI adapters; it does not support 3.3 V adapters. v The computer uses a rotational interrupt technique to configure PCI adapters. Because of this technique, you can install a variety of PCI adapters that currently do not support PCI interrupt sharing. v PCI slots 1 through 3 are on PCI bus 0. The system scans the AGP slot and PCI expansion slots 1 through 3 to assign system resources, then the system starts the PCI devices in the following order: PCI expansion slots 1 and 2, system board integrated drive electronics (IDE) or SCSI devices, and then PCI expansion slot 3. Note: To change the startup sequence for PCI devices, start the IBM Setup Utility program, select Startup from the main menu, select Startup Installing options 47