Lexmark X7550 User's Guide (Mac) - Page 190
Printer receives a blank fax, Received fax has poor print quality, Check original document, Check ink
View all Lexmark X7550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
4 Press or repeatedly until the Fax Setup submenu is highlighted. 5 Press . 6 Press or repeatedly until the Dialing and Sending submenu is highlighted. 7 Press . 8 Press or repeatedly until you reach Dial Method. 9 Press or repeatedly until Behind PBX (Dial Tone Detect Off) appears. 10 Press to save. Printer receives a blank fax These are possible causes and solutions. Try one or more of the following: Check original document Ask the sender to verify the original document was loaded correctly. Check ink Check the ink levels, and install a new print cartridge if necessary. Check cartridges 1 Remove the print cartridges. 2 Make sure the sticker and tape have been removed. 3 Reinsert the print cartridges. Received fax has poor print quality These are possible solutions. Try one or more of the following: Review checklist for sender • Check that the quality of the original document is satisfactory. • Resend the fax. There may have been a problem with the quality of the telephone line connection. • Increase the fax scan resolution. Check ink Check the ink levels and install a new print cartridge if necessary. Decrease the transmission speed 1 From the control panel, press or repeatedly until Fax is highlighted. 2 Press . 3 Press or repeatedly until the Fax Setup submenu is highlighted. Troubleshooting 190