Lexmark X7550 User's Guide (Mac) - Page 203

Fax-related error messages Phone Line Busy These are possible solutions. Try one or more of the following: Change redial settings The printer automatically redials three times at 2-minute intervals. You can change the default settings to redial up to five times at intervals up to 8 minutes. To change the redial settings: 1 From the control panel, press or repeatedly until Fax is highlighted. 2 Press . 3 Press or repeatedly until the Fax Setup submenu is highlighted. 4 Press . 5 Press or repeatedly until the Dialing and Sending submenu is highlighted. 6 Press . 7 To change the length of time between redials: a Press or repeatedly until you reach Redial Time. b Press or repeatedly until the setting you want appears. c Press to save. 8 To change the number of times the printer will redial: a Press or repeatedly until you reach Redial Tries. b Press or repeatedly until the setting you want appears. c Press to save. Schedule to resend fax at a later time See "Sending a broadcast fax at a scheduled time" on page 76. Fax Error The fax machines have stopped communicating. Resend the fax. There may have been a problem with the quality of the telephone line connection. Failed to Connect These are possible solutions. Try one or more of the following: Use phone line checklist • Resend the fax. There may have been a problem with the quality of the telephone line connection. • Place a test call to the telephone number to which you want to send a fax to make sure that it is working correctly. • If the telephone line is being used by another device, wait until the other device is finished before sending the fax. Troubleshooting 203