Netgear DGND3300v2 User Manual - Page 19
Wireless Settings, N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual - as access point
View all Netgear DGND3300v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual Figure 9. The settings for this screen are explained in the following table. Settings Name (11N SSID) Name (11G SSID) Region Mode Description This is the wireless network name. Enter a 32-character (maximum) name in this field. This field is case-sensitive. In a setting where there is more than one wireless network, different wireless network names provide a means for separating the traffic. Any device that you want to participate in a wireless network must use the SSID. The location where the N300 Wireless Modem Router is used. Specify which 802.11 data communications protocol is used. You can select one of the following modes: • Up to 300 Mbps at 2.4 GHz. Performance mode, using channel expansion to achieve the 270 Mbps data rate. The N300 wireless modem router uses the channel you selected as the primary channel and expands to the secondary channel (primary channel +4 or -4) to achieve a 40 MHz frame-by-frame bandwidth. The N300 wireless modem router detects channel usage and disables frame-by-frame expansion if the expansion would result in interference with the data transmission of other access points or clients. • Up to 300 Mbps at 5 GHz and 54 Mbps at 2.4 GHz. This is the default mode, which is recommended. • Up to 145 Mbps at 2.4 GHz. Neighbor friendly mode, for reduced interference with neighboring wireless networks. Provides two transmission streams with different data on the same channel at the same time, but also allows 802.11b and 802.11g wireless devices. • Up to 145 Mbps at 5 GHz and 54 Mbps at 2.4 GHz. Legacy mode, for compatibility with the slower 802.11b and 802.11g wireless devices. Chapter 2. Wireless Settings | 19