Netgear DGND3300v2 User Manual - Page 93
The VPN Wizard Summary screen displays, Using Auto Policy to Con VPN Tunnels - as repeater
View all Netgear DGND3300v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual The VPN Wizard Summary screen displays: To view the VPNC-recommended authentication and encryption settings used by the VPN Wizard, click the here link. 5. Click Done on the Summary screen. The VPN Policies screen displays, showing that the new tunnel is enabled. Note: See Using Auto Policy to Configure VPN Tunnels on page 101 for information about how to enable the IKE keep-alive capability on an existing VPN tunnel. 6. Repeat these steps for the gateway on LAN B, and pay special attention to the following network settings: • WAN IP of the remote VPN gateway (for example, 14.15.16.17) • LAN IP settings of the remote VPN gateway: - IP address (for example, 192.168.0.1) - Subnet mask (for example, 255.255.255.0) - Pre-shared key (for example, 12345678) 7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps: Chapter 6. Virtual Private Networking | 93