Netgear DGND3300v2 User Manual - Page 91
Gateway-to-Gateway VPN Tunnel, Table 4.
View all Netgear DGND3300v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual Follow this procedure to configure a gateway-to-gateway VPN tunnel using the VPN Wizard. IP: 192.168.0.1 14.15.16.17 VPN tunnel IP:192.168.3.1 22.23.24.25 Gateway A Internet Gateway B Figure 53. Gateway-to-Gateway VPN Tunnel Set the LAN IPs on each N300 wireless modem router to different subnets and configure each correctly for the Internet. The subsequent examples assume the settings shown in the following table. Table 4. Gateway-to-Gateway VPN Tunnel Configuration Worksheet Parameter Connection Name Pre-Shared Key Secure Association Perfect Forward Secrecy Encryption Protocol Authentication Protocol Diffie-Hellman (DH) Group Key Life in seconds IKE Life Time in seconds VPN Endpoint Local IPSecID Gateway_A Gateway_B GW_A GW_B Value to Be Entered Field Selection GtoGr N/A 12345678 N/A N/A Main Mode N/A Enabled N/A DES N/A MD5 N/A Group 1 28800 (8 hours) N/A 3600 (1 hour) N/A LAN IP Address Subnet Mask 192.168.0.1 192.168.3.1 255.255.255.0 255.255.255.0 Manual Keys Disabled 3DES SHA-1 Group 2 FQDN or Gateway IP (WAN IP Address) 14.15.16.17 22.23.24.25 Note: The LAN IP address ranges of each VPN endpoint must be different. The connection will fail if both are using the NETGEAR default address range of 192.168.0.x. Chapter 6. Virtual Private Networking | 91