Netgear DGND3300v2 User Manual - Page 97
Verifying the Status of a VPN Tunnel, Start Using a VPN Tunnel to Activate
View all Netgear DGND3300v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual Once the connection is established, you can open a browser on the PC and enter the LAN IP address of the remote N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2. After a short wait, you should see the login screen of the N300 wireless modem router (unless another PC already has the N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 management interface open). • Gateway-to-gateway configuration. Test the VPN tunnel by pinging the remote network from a PC attached to Gateway A (the N300 wireless modem router). a. Open a command prompt (for example, Start > Run > cmd). b. Type ping 192.168.3.1. Note: The pings might fail the first time. If they do, then try the pings a second time. Start Using a VPN Tunnel to Activate It To use a VPN tunnel, use a Web browser to go to a URL whose IP address or range is covered by the policy for that VPN tunnel. Verifying the Status of a VPN Tunnel To use the VPN Status screen to determine the status of a VPN tunnel: 1. Log in to the N300 wireless modem router. 2. On the main menu, select VPN Status to display the VPN Status/Log screen. Chapter 6. Virtual Private Networking | 97