Netgear DGND3300v2 User Manual - Page 31
Wireless Guest Network g/b, Wireless, Guest Network a, n, Enable Guest Network
View all Netgear DGND3300v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual Mode in Wireless Settings Screen Menu Selection Guest Network Default SSID Wireless Compatibility Up to 270 Mpbs Guest Network b/g/n NETGEAR-2.4G_n_Guest1 • 2.4GHz 802.11n • 2.4GHz 802.11g • 2.4GHz 802.11b Up to 145 Mbps at 5 GHz & 54 Guest Network a/n Mbps at 2.4 GHz NETGEAR-2.4G_n_Guest1 • 5GHz 802.11a • 5GHz 802.11n Guest Network b/g NETGEAR-2.4G_g_Guest1 • 2.4GHz 802.11g • 2.4GHz 802.11b Up to 145 Mbps at 2.4 GHz Guest Network a/n NETGEAR-2.4G_n_Guest1 • 2.4GHz 802.11n • 2.4GHz 802.11g • 2.4GHz 802.11b To configure a wireless guest network: 1. In the main menu, under Setup, select either Wireless Guest Network g/b or Wireless Guest Network a, n. A Wireless Guest Network Settings screen similar to the following figure displays: Figure 16. 2. Make sure that the Enable Guest Network check box is selected. 3. You can specify whether the SSID broadcast is enabled, and whether you want to allow guests to access your local network. 4. You can also change the guest name in the Guest Wireless Network Name (SSID) field. Note: NETGEAR strongly recommends that you change the default guest network name (SSID) from the default name to a different name. Note that the name is case-sensitive. For example, GuestNetwork is not the same as Guestnetwork. Chapter 2. Wireless Settings | 31