Netgear DGND3300v2 User Manual - Page 40
Service, Security Settings
View all Netgear DGND3300v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual Figure 21. 2. From the Service list, select the service that you want to add or edit. 3. Enter the settings to specify the service as explained in the following table. Field Outbound Rules Inbound Rules Action • For outbound rules, ALLOW rules are useful only if the traffic is already covered by a BLOCK rule (that is, you want to allow a subset of traffic that is currently blocked by another rule). • To define the schedule used in these selections, use the Schedule screen (see Scheduling Blocking on page 45). • For inbound rules, BLOCK rules are useful only if the traffic is already covered by an ALLOW rule (that is, you want to block a subset of traffic that is currently allowed by another rule). • To define the schedule used in these selections, use the Schedule screen (see Scheduling Blocking on page 45). LAN users (outbound services only) These settings determine which computers - on your network are affected by this rule, based on their source (LAN) IP address. Select the option you want: • Any. All local IP addresses are covered by this rule. • Address range. If this option is selected, you must fill in the Start and Finish fields. • Single address. Enter the required address in the Start fields. Send to LAN - Server (inbound services only) Enter the IP address of the PC or server on your LAN that will receive the inbound traffic covered by this rule. 40 | Chapter 3. Security Settings