Netgear GS110TP GS108T/ GS110TP Smart Switch Software Administration Manual - Page 101
Rapid STP, Refresh, Switching > STP > Advanced
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Field Description Designated Cost Displays cost of the port participating in the STP topology. Ports with a lower cost are less likely to be blocked if STP detects loops. Designated Bridge Bridge Identifier of the bridge with the Designated Port. It is made up using the bridge priority and the base MAC address of the bridge. Designated Port Port Identifier on the Designated Bridge that offers the lowest cost to the LAN. It is made up from the port priority and the interface number of the port. Topology Change Acknowledge Identifies whether the next BPDU to be transmitted for this port would have the topology change acknowledgement flag set. It is either True or False. Edge Port Indicates whether the port is enabled as an edge port. Possible values are Enabled or Disabled. Point-to-point MAC Derived value of the point-to-point status. CST Regional Root Displays the bridge priority and base MAC address of the CST Regional Root. CST Path Cost Displays the path Cost to the CST tree Regional Root. Port Forwarding State Displays the Forwarding State of this port. Click Refresh to update the information on the screen with the most current data. Rapid STP Use the Rapid STP page to view information about Rapid Spanning Tree (RSTP) port status. To display the Rapid STP page, click Switching > STP > Advanced RSTP. 34 | Chapter 3: Configuring Switching Information