Netgear GS110TP GS108T/ GS110TP Smart Switch Software Administration Manual - Page 135

GS108T and GS110TP Smart Switch Software Administration Manual Field Description Policy Instance Table Displays the current and maximum number of rows of the policy instance table. Policy Attributes Table Displays the current and maximum number of rows of the policy attributes table. Service Table Displays the current and maximum number of rows of the service table. Click Refresh to update the page with the current settings. Class Configuration Use the Class Configuration page to add a new DiffServ class name, or to rename or delete an existing class. The page also allows you to define the criteria to associate with a DiffServ class. As packets are received, these DiffServ classes are used to prioritize packets. You can have multiple match criteria in a class. The logic is a Boolean logical-and for this criteria. After creating a Class, click the class link to the Class page. To display the page, click QoS  DiffServ  Advanced  Class Configuration. To configure a DiffServ class: 1. To create a new class, enter a class name, select the class type, and click Add. The switch supports only the Class Type value All, which means all the various match criteria defined for the class should be satisfied for a packet match. All signifies the logical AND of all the match criteria. 2. To rename an existing class, select the check box next to the configured class, update the name, and click Apply. 3. To remove a class, click the check box beside the Class Name, then click Delete. 4. Click Refresh to refresh the page with the most current data from the switch. Chapter 4: Configuring Quality of Service | 135