Netgear GS110TP GS108T/ GS110TP Smart Switch Software Administration Manual - Page 108
Multicast, Auto-Video Configuration - not sending multicast
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Multicast Multicast IP traffic is traffic that is destined to a host group. Host groups are identified by class D IP addresses, which range from 224.0.0.0 to 239.255.255.255. From the Multicast link, you can access the following pages: • Auto-Video Configuration on page 41 • IGMP Snooping on page 42 • IGMP Snooping Querier on page 50 Auto-Video Configuration The Auto-Video feature simplifies IGMP Snooping Querier configuration if the switch supports devices or applications running multicast traffic, such as video surveillance cameras. To access the Auto-Video Configuration page, click Switching Multicast Auto-Video. To configure the Auto-Video feature: 1. Enable or disable the Auto-Video feature. • Enable. The IGMP Snooping Querier is automatically configured with the default VLAN ID for the Auto-Video VLAN • Disable. IGMP Snooping settings must be manually configured. 2. Click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch Chapter 3: Configuring Switching Information | 41