Netgear GS110TP GS108T/ GS110TP Smart Switch Software Administration Manual - Page 120
IGMP Snooping Querier VLAN Status, Switching, Multicast, IGMP Snooping Querier, Querier VLAN, Status
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
GS108T and GS110TP Smart Switch Software Administration Manual IGMP Snooping Querier VLAN Status Use this page to view the operational state and other information for IGMP snooping queriers for VLANs on the network. To access this page, click Switching Multicast IGMP Snooping Querier Querier VLAN Status. The following table describes the information available on the Querier VLAN Status page. Field Description VLAN ID Specifies the VLAN ID on which the IGMP Snooping Querier is administratively enabled and for which VLAN exists in the VLAN database. Operational State Specifies the operational state of the IGMP Snooping Querier on a VLAN: • Querier: The snooping switch is the querier in the VLAN. The snooping switch will send out periodic queries with a time interval equal to the configured querier query interval. If the snooping switch sees a better querier (numerically lower) in the VLAN, it moves to non-querier mode. • Non-Querier: The snooping switch is in non-querier mode in the VLAN. If the querier expiry interval timer expires, the snooping switch moves into querier mode. • Disabled: The snooping querier is not operational on the VLAN. The snooping querier moves to disabled mode when IGMP snooping is not operational on the VLAN, when the querier address is not configured, or the network management address is not configured. Operational Version Displays the IGMP protocol version of the operational querier. Last Querier Address Displays the IP address of the last querier from which a query was snooped on the VLAN. Last Querier Version Displays the IGMP protocol version of the last querier from which a query was snooped on the VLAN. Operational Max Response Displays the maximum response time to be used in the queries that are sent Time by the snooping querier. Click Refresh to redisplay the page with the latest information from the switch. Chapter 3: Configuring Switching Information | 53