Netgear GS110TP GS108T/ GS110TP Smart Switch Software Administration Manual - Page 80

GS108T and GS110TP Smart Switch Software Administration Manual 1. Select the check box next to the LAG to configure. You can select multiple LAGs to apply the same setting to the selected interfaces. Select the check box in the heading row to apply the same settings to all interfaces. 2. Configure or view the following settings: • LAG Name. Specify the name you want assigned to the LAG. You may enter any string of up to 15 alphanumeric characters. A valid name has to be specified in order to create the LAG • Description. Specify the Description string to be attached to a LAG. It can be up to 64 characters in length. • LAG ID. Displays the number assigned to the LAG. This field is read-only. • Link Trap. Specify whether you want to have a trap sent when link status changes. The factory default is Disable, which will cause the trap to be sent. • Admin Mode. Select Enable or Disable from the menu. When the LAG (port channel) is disabled, no traffic will flow and LAGPDUs will be dropped, but the links that form the LAG (port channel) will not be released. The factory default is Enable. • STP Mode. Select the Spanning Tree Protocol Administrative Mode associated with the LAG. • LAG Type. Select Static or LACP. When the LAG is static, it does not transmit or process received LAGPDUs, for example the member ports do not transmit LAGPDUs and all the LAGPDUs it may receive are dropped. The default is Static. • Active Ports. A listing of the ports that are actively participating members of this Port Channel. A maximum of 4 ports can be assigned to a port channel. • LAG State. Indicates whether the link is Up or Down. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 4. If you make any changes to this page, click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. Chapter 3: Configuring Switching Information | 13