Netgear GS110TP GS108T/ GS110TP Smart Switch Software Administration Manual - Page 93
Auto-VoIP, Switching, Cancel, Apply
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Auto-VoIP The Auto-VoIP automatically makes sure that time-sensitive voice traffic is given priority over data traffic on ports that have this feature enabled. Auto-VoIP checks for packets carrying the following VoIP protocols: • Session Initiation Protocol (SIP) • H.323 • Signalling Connection Control Part (SCCP) • Media Gateway Control Protocol (MGCP) VoIP frames that are received on ports that have the Auto-VoIP feature enabled are marked with CoS traffic class 3. To display the Auto-VoIP page, click Switching Auto-VoIP. To configure Auto-VoIP settings: 1. Select the check box next to the port to configure. You can select multiple check boxes to apply the same setting to all selected ports. 2. From the Auto-VoIP Mode menu, specify whether to enable or disable Auto-VoIP on the selected port. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 4. If you make any changes to this page, click Apply to send the updated configuration to the switch. 26 | Chapter 3: Configuring Switching Information