Netgear GS110TP GS108T/ GS110TP Smart Switch Software Administration Manual - Page 95
STP Switch Configuration, Switching > STP >, Basic, Spanning Tree State, STP Operation Mode
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
GS108T and GS110TP Smart Switch Software Administration Manual STP Switch Configuration The Spanning Tree Switch Configuration/Status page contains fields for enabling STP on the switch. To display the Spanning Tree Switch Configuration/Status page, click Switching > STP > Basic STP Configuration. To configure STP settings on the switch: 1. From the Spanning Tree State field, specify whether to enable or disable Spanning Tree operation on the switch. 2. From the STP Operation Mode field, Specifies the Force Protocol Version parameter for the switch. Options are: • STP (Spanning Tree Protocol): IEEE 802.1D • RSTP (Rapid Spanning Tree Protocol): IEEE 802.1w • MSTP (Multiple Spanning Tree Protocol): IEEE 802.1s 3. Specify the configuration name and revision level. • Configuration Name. Name used to identify the configuration currently being used. It may be up to 32 alphanumeric characters. • Configuration Revision Level. Number used to identify the configuration currently being used. The values allowed are between 0 and 65535. The default value is 0. 4. Specify the BPDU Flooding status for all ports or for individual ports. When this feature is enabled, BPDU packets arriving at this port are flooded to other ports if STP is disabled. 28 | Chapter 3: Configuring Switching Information