Netgear GS110TP GS108T/ GS110TP Smart Switch Software Administration Manual - Page 44
DNS, Denial of Service L4 Port, Apply, Cancel, System, Management, DNS Configuration - factory reset
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
GS108T and GS110TP Smart Switch Software Administration Manual drop packets that have TCP flag SYN set and TCP source port less than 1024 or TCP control flags set to 0 and TCP sequence number set to 0 or TCP flags FIN, URG, and PSH set and TCP sequence number set to 0 or both TCP flags SYN and FIN set. The factory default is Disable. • Denial of Service L4 Port. Enable or disable this option by selecting the appropriate radio button. Enabling L4 Port DoS prevention causes the switch to drop packets that have TCP/UDP source port equal to TCP/UDP destination port. The factory default is Disable. • Denial of Service ICMP. Enable or disable this option by selecting the appropriate radio button. Enabling ICMP DoS prevention causes the switch to drop ICMP packets that have a type set to ECHO_REQ (ping) and a size greater than the configured ICMP packet size. The factory default is Disable. • Denial of Service Max ICMP Size. Specify the Max ICMP packet size allowed. If ICMP DoS prevention is enabled, the switch will drop ICMP ping packets that have a size greater then this configured Max ICMP packet size. The factory default is Disable. 2. If you change any of the DoS settings, click Apply to apply the changes to the switch. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. DNS You can use these pages to configure information about DNS servers the network uses and how the switch operates as a DNS client. DNS Configuration Use this page to configure global DNS settings and DNS server information. To access this page, click System Management DNS DNS Configuration. 44 | Chapter 2: Configuring System Information