Netgear GS110TP GS108T/ GS110TP Smart Switch Software Administration Manual - Page 112
IGMP Snooping Table, Fast Leave Admin Mode
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
GS108T and GS110TP Smart Switch Software Administration Manual To configure IGMP Snooping interface settings: 1. To configure IGMP Snooping settings for a physical port, click PORTS. 2. To configure IGMP Snooping settings for a Link Aggregation Group (LAG), click LAGS. 3. To configure IGMP Snooping settings for both physical ports and LAGs, click ALL. 4. Select the check box next to the port or LAG to configure. You can select multiple ports and LAGs to apply the same setting to the selected interfaces. Select the check box in the heading row to apply the same settings to all interfaces. 5. Configure the IGMP Snooping values for the selected port(s) or LAG(s): • Admin Mode. Select the interface mode for the selected interface for IGMP Snooping for the switch from the menu. The default is Disable. • Host Timeout. Specify the amount of time you want the switch to wait for a report for a particular group on a particular interface before it deletes that interface from the group. Enter a value between 2 and 3600 seconds. The default is 260 seconds. • Max Response Time. Specify the amount of time you want the switch to wait after sending a query on an interface because it did not receive a report for a particular group on that interface. Enter a value greater or equal to 1 and less than the Host Timeout, in seconds. The default is 10 seconds. • MRouter Timeout. Specify the amount of time you want the switch to wait to receive a query on an interface before removing it from the list of interfaces with multicast routers attached. Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of zero indicates an infinite timeout; no expiration. • Fast Leave Admin Mode. Select the Fast Leave mode for a particular interface from the menu. The default is Disable. 6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 7. If you make any configuration changes, click Apply to apply the new settings to the switch. Configuration changes take effect immediately. IGMP Snooping Table Use the IGMP Snooping Table page to view all of the entries in the Multicast Forwarding Database that were created for IGMP snooping. To access the IGMP Snooping Table page, click Switching Multicast IGMP Snooping IGMP Snooping Table. Chapter 3: Configuring Switching Information | 45