Netgear GS110TP GS108T/ GS110TP Smart Switch Software Administration Manual - Page 233
MaxFail, Interval, Cancel, Apply
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
GS108T and GS110TP Smart Switch Software Administration Manual • MaxFail. Specify the maximum number of failures allowed in the session. The valid range is 0-255. • Interval. Specify the time between probes in seconds. The valid range is 1-60. • Port. Specify the UDP destination port in probe packets. The valid range is 1-65535. • Size. Specify the size of probe packets. The valid range is 0-65507. 3. Click Cancel to cancel the operation on the screen and reset the data on the screen to the latest value of the switch. 4. Click Apply to initiate the traceroute. The results display in the TraceRoute area. Chapter 7: Maintaining the System | 233
Chapter 7:
Maintaining the System
|
233
GS108T and GS110TP Smart Switch Software Administration Manual
•
MaxFail
. Specify the maximum number of failures allowed in the session. The valid
range is 0–255.
•
Interval
. Specify the time between probes in seconds. The valid range is 1–60.
•
Port
. Specify the UDP destination port in probe packets. The valid range is 1–65535.
•
Size
. Specify the size of probe packets. The valid range is 0–65507.
3.
Click
Cancel
to cancel the operation on the screen and reset the data on the screen to the
latest value of the switch.
4.
Click
Apply
to initiate the traceroute. The results display in the TraceRoute area.