Netgear GS110TP GS108T/ GS110TP Smart Switch Software Administration Manual - Page 89
Voice VLAN, Voice VLAN Properties
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Voice VLAN Configure the Voice VLAN settings for ports that carry traffic from IP phones. The Voice VLAN feature can help ensure that the sound quality of an IP phone is safeguarded from deteriorating when the data traffic on the port is high. From the VLAN link, you can access the following pages: • Voice VLAN Properties on page 22 • Voice VLAN Port Setting on page 23 • Voice VLAN OUI on page 24 Voice VLAN Properties To display the Voice VLAN Properties page, click Switching Voice VLAN Basic Properties. To configure Voice VLAN: 1. From the Voice VLAN Status field, enable or disable Voice VLAN on the switch. If the switch does not handle traffic from IP phones, the status should be disabled. 2. From the Voice VLAN ID field, select the VLAN to use for voice traffic on the switch. The VLAN must already exist on the switch. For information about how to create VLANs, see VLAN Configuration on page 17. 3. From the Class of Service field, set the CoS tag value to be reassigned for packets received on the Voice VLAN when Remark CoS is enabled. 4. From the Remark CoS field, select Enable or Disable to reassign the CoS tag value to packets received on the Voice VLAN. 5. From the Voice VLAN Aging Time field, specify the amount of time after the last IP phone's OUI is aged out for a specific port. The port will age out after the bridge and voice aging time. 22 | Chapter 3: Configuring Switching Information