Toshiba Qosmio G30 PQG31C-HD202EF Users Manual Canada; English - Page 208

Optional Devices If you connect the floppy disk drive after turning on the computer, it will take about 10 seconds for the computer to recognize the drive. Do not disconnect and reconnect before 10 seconds has elapsed. Disconnecting USB floppy disk drive When you have finished using the floppy disk drive, follow the procedures below to disconnect it: 1. Wait for the indicator light to go out to make sure all floppy disk activity has stopped. If you disconnect the floppy disk drive or turn off the power while the computer is accessing the drive you may lose data or damage the floppy disk or the drive. 2. Click the Safely Remove Hardware icon on the Task Bar. 3. Click floppy disk drive device that you want remove. 4. Pull the floppy disk drive's USB connector out of the computer's USB port. External monitor An external analog monitor can be connected to the external monitor port on the computer. The computer supports WXGA+ and WUXGA video modes. To connect a monitor, follow the steps below. 1. Turn the computer off. 2. Connect the monitor cable to the external monitor port and tighten the screws on the left and right hand side. External monitor port Monitor cable Figure 9-20 Connecting the monitor cable to the external monitor port The computer is equipped with either an HDMI or D-Video out port. 9-20 User's Manual