Yamaha AW2816 Owner's Manual - Page 189

Chapter Mastering 12 12 To execute the writing operation, move the cursor to the OK button and press the [ENTER] key. To cancel without executing, move the cursor to the CANCEL button and press the [ENTER] key. While the data is being written, a popup window will display the estimated remaining time and the progress of the operation. When writing is completed, the tray of the CD-RW will open automatically. Tip! If the writing test has been turned on, the test will be executed first, and then the data will be written. If a problem is detected during the test, a message will be displayed. The subsequent steps will differ as follows, depending on whether you are using Track At Once or Disc At Once. s When using Track At Once When writing using Track At Once has been completed, a popup window will ask you whether you want to Finalize the media. s When using Disc At Once When writing using Disc At Once has been completed, a popup window will ask whether you want to write once more on new media. If you want to create another CD with the same contents, insert a new CD-R/RW disc, move the cursor to the OK button, and press the [ENTER] key. The tray of the CD-RW drive will close automatically, and writing will be executed once again. Tip! When writing is executed multiple times in succession, processing of the second and subsequent disc will take less time than for the first disc. If you want to finalize the disc, move the cursor to the OK button and press the [ENTER] key. The tray of the CD-RW will close automatically, and the disc will be finalized. If you do not want to finalize the disc, move the cursor to the CANCEL button and press the [ENTER] key. In this case, other audio data can be added later to the ejected CD-R media. If you selected the CANCEL button, the following popup window will appear, asking you whether you want to write again on other media. If you want to create another disc containing the contents of the list in step 9, insert a new CD-R disc, move the cursor to the OK button, and press the [ENTER] key. The CD-RW tray will close automatically, and writing will be executed once again. 184 Operation section