Yamaha AW2816 Owner's Manual - Page 65

Recording Now we will record the bass sound on track 3. 1 In the Locate section, press the [ ] key. The counter in the display will rewind to the zero location (00:00:00.000). 2 To begin recording, hold down the REC [ ] key and press the PLAY [ ] key. The REC [ ] key and PLAY [ ] key will light, and recording will begin. 3 While listening to the rhythm machine (drums) you previously recorded on tracks 1/2, play your bass. If you want to change the monitor balance between the rhythm machine (drums) and bass, press the RECORDER [1-8] key of the MIXING LAYER section, and adjust faders 1-3. 4 When you are finished playing, press the STOP [ ] key. The REC [ ] key and PLAY [ ] key will go dark, and recording will stop. 5 To listen to the recorded content, press the [ ] key, and then press the PLAY [ ] key. If you decide to re-do the recording, stop the song, press the [UNDO] key to cancel the previous recording, and then repeat steps 1-4. Tip! You can press the [IN] key of the Locate section to return instantly to the location at which recording was last begun. 6 If you are satisfied with your recording, press the REC TRACK SELECT [3] key to disable record-ready mode. Tip! • You can also re-record from the middle of the song. If you are repeatedly re-recording the same region, it is convenient to set a marker or a locate point at that location for quick access (¡P.102), or to use the auto punch-in/out function (¡P.64). • The basic procedure described above also applies when you want to record additional instruments on the remaining tracks. Go ahead and record the remaining instruments for your song in the same way. Operation section 3 57 Let's record on the AW2816