Yamaha AW2816 Owner's Manual - Page 73
key and press, and hold down the REC
View all Yamaha AW2816 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
6 To rehearse auto punch-in/out, press the PLAY [ ] key. A The PLAY [ ] key will light, and playback will begin from the pre-roll point. B When you reach the auto punch-in point, the REC [ ] key will begin blinking, and the signal being monitored for the track you selected in step 3 will switch from the track playback sound to the input signal (the recording source). However, recording will not actually occur. C When you reach the auto punch-out point, the REC [ ] key will go dark, and the signal being monitored will switch back to the track playback sound. D When you reach the post-roll point, the trans- port will return to the pre-roll point and stop. 7 If you want to rehearse again, press the PLAY [ ] once again while stopped. Tip! If you press the [REPEAT] key before or during rehearsal, operations 1-4 of step 6 will be repeated. (The A-B Repeat function will be disabled during this time.) If you want to stop repeating rehearsal, press the [REPEAT] key once again or press the STOP [ ] key. 8 To actually perform auto punch-in/out, make sure that the transport is stopped, and hold down the REC [ ] key and press the PLAY [ ] key. A The PLAY [ ] key will light, the REC [ ] will blink, and playback will begin from the pre-roll point. B When you reach the auto punch-in point, the REC [ ] key will change from blinking to steadily lit, and recording will begin on the track you selected in step 1 (punch-in). C When you reach the auto punch-out point, the REC [ ] key will resume blinking, recording will be defeated, and you will 3 return to playback mode (punch-out). D When you reach the post-roll point, the trans- port will return to the pre-roll point and stop. 9 If you want to listen to the recorded result, press the [AUTO PUNCH] key to make it go dark, and then press the PLAY [ ] key. Let's record on the AW2816 Tip! If you make a mistake while recording with auto punch-in/out, press the [UNDO] key while stopped. The previous recording operation will be cancelled, and the state before recording will be recovered. The following diagram shows the auto punch-in/out procedure. 1 2 3 16 REC TRACK SELECT Pre-roll point Auto punch-in point Auto punch-out point Post-roll point Locate Playback Rehearsal Playback Rehearsal Playback Recording Playback Actual recording Operation section 65