Yamaha AW2816 Owner's Manual - Page 258

SETUP screen D.in Setup page Word clock and cascade settings Function In this page you can select the word clock source to which the AW2816 will synchronize, and make vari-pitch set- tings. You can also make settings for cascading the digital output of an exter- 1 nal device into the stereo bus of the AW2816. 3 Key operation 4 • [SETUP] key ¡ [F1] (D.in Setup) key • Repeatedly press the [SETUP] key until the screen shown at the right appears. 2 5 Screen functions A Slot If an optional I/O card is installed in OPTION I/O slot, a graphic will be displayed to show the type of I/O card. Cards in which no card is installed will be displayed as "No Card." B WORD CLOCK SOURCE From the following choices, select one of the following clock source to which the AW2816 will synchronize. • SLOT 1/2-7/8 The input signal from a digital I/O card installed in OPTION I/O slot will be the clock source. One pair of digital I/O card input channels 1/2-7/8 can be selected. Choose this setting when you want to use an external device such as a digital MTR as the word clock master, so that the AW2816 will synchronize to the clock data included in the digital input signal. • INT The internal clock of the AW2816 will be selected as the clock source. Choose this setting when you are using the AW2816 by itself, or when you want to use the AW2816 as the word clock master to which a digital MTR or other external device will synchronize. • D.ST IN The word clock data included in the input signal of the DIGITAL STEREO IN jack will be the clock source. Choose this setting when cascading the digital output of an external device into the stereo bus of the AW2816, or when you are inputting the signal of a device that cannot act as a slave (e.g., a CD player) via the DIGITAL STEREO IN jack. A highlighted button indicates that it is currently selected as the word clock source. A button with an X mark indicates that no digital audio signal is being input from the corresponding digital I/O card or connector. A button that is displayed in this way cannot be selected as a clock source. A button with a/mark indicates that a digital audio source is being input from the corresponding digital I/O card or connector, but is not synchronized with the internal clock of the AW2816. This indicates that digital audio is being input from the corresponding digital I/O card or connector, and is synchronized with the internal clock of the AW2816. 256 Reference section