Yamaha AW2816 Owner's Manual - Page 269
Ftime Gcd/dat Digital Rec Hdigital Out Copyright, If Digital Out Copyright Is Set To Enable
View all Yamaha AW2816 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
UTILITY screen F TIME This specifies the interval of playback (Nudge Time) that is repeated by the Nudge function. This can be adjusted in 1 millisecond increments over a range of 25-800 milliseconds (default setting= 100 milliseconds). For details on using the Nudge function, refer to page 96. G CD/DAT DIGITAL REC This setting specifies whether digital recording from a CD player or DAT recorder connected to the DIGITAL STEREO IN connector, or importing from an audio CD inserted in the CD-RW drive will be allowed (ENABLE) or prohibited (DISABLE). If the button is displayed as "DISABLE," moving the cursor to the button and pressing the [ENTER] key will display the following warning message. H DIGITAL OUT COPYRIGHT This setting specifies whether SCMS (Serial Copy Management System) copy protect data will be enabled (ENABLE) or not (DISABLE) for the digital signal output from the DIGITAL STEREO OUT jack. When you move the cursor to this button and press the [ENTER] key, the setting will alternate between ENABLE/DISABLE. Even if this is set to ENABLE, it will be possible to digitally record onto a DAT/MD recorder connected to the DIGITAL STEREO OUT connector, but it will not be possible to make second-generation digital copies. • If DIGITAL OUT COPYRIGHT is set to ENABLE AW2816 When you move the cursor to the NEXT button and press the [ENTER] key, the second page of the warning message will be displayed. DIGITAL OUT COPYRIGHT = ENABLE Digital recording possible DAT or MD, etc. Digital recording not possible If you move the cursor to the YES button and press the [ENTER] key, the warning message will disappear, and the button will change to "ENABLE." Reference section 267