Yamaha AW2816 Owner's Manual - Page 252

CD screen CD Write page Use a CD-RW drive to create an audio CD Function Write the stereo track data of the song to CD-R/RW media to create an audio CD (Mastering function). 1 6 Key operation • [CD] key ¡ [F1] (CD Write) key 2 • Repeatedly press the [CD] key until the screen shown at right appears. 3 4 7 5 Screen functions A DRIVE Select an internal or external CD-RW drive. Move the cursor to this area and use the [DATA/JOG] dial to select "ATAPI" (internal CD-RW drive) or a SCSI ID number (external CD-RW drive), and then press the [ENTER] key to confirm your selection. B FINALIZE button This button writes track locations and other information into the data area to "finalize" CD-R media that was written using the "track at once" method. This button will be displayed only if the TRACK AT ONCE button (3) is turned on. CD-R media to which audio data was recorded using the "track at once" method cannot be played on a conventional CD player or by the CD Player function of the AW2816 until the media has been finalized. C TRACK AT ONCE button D DISC AT ONCE button Use these two buttons to select one of the following two methods by which data will be stored on the CD-R or CD-RW media. • Track At Once This method records audio data as individual tracks on the CD. This can be selected only if the media is CD-R. A CD-R disc that was recorded using this method allows additional data to be written, as long as the disc has not yet been finalized. (However, CD-R media that has not yet been 8 9 KJ L finalized cannot be played on a conventional CD player or by the CD Player function of the AW2816.) • Disc At Once This method records all tracks (the entire disc) at once. CD-R/RW media recorded using this method will be finalized automatically. E WRITE SPEED buttons Use the x1, x2, x4, and x6 buttons to select the writing speed (single speed/double speed/quad speed/6x speed). Normally you will select the fastest speed that your CD-RW drive supports. F Track list In this area you can view and select the stereo track(s) that will be written to each track of the CD. The line enclosed by the dotted lines is the track that is selected for the current operation. The following information is shown in each column of the track list. • TRACK This indicates the CD track number. Move the cursor to this area and use the [DATA/ JOG] dial to select the track to which the operation will apply. • SONG NAME ...... This shows the song name of songs that contain a stereo track. Move the cursor to this area and use the [DATA/JOG] dial to select the stereo track that will be written to the corresponding track. 250 Reference section