Yamaha AW2816 Owner's Manual - Page 272
CTRL Key Asgn. Assign additional functions to the [CTRL] key + function keys
View all Yamaha AW2816 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
UTILITY screen CTRL Key Asgn. page Assign additional functions to the [CTRL] key + function keys Function 1 Select the functions that will be executed when you hold down the [CTRL] key and press a function key [F1]-[F5]. Key operation • [UTILITY] key ¡ [F5] (CTRL Key Asgn.) key • Repeatedly press the [UTILITY] key 2 until the screen shown at the right appears. 3 Screen functions A CTRL+F1-CTRL+F5 This area displays the function that is currently assigned to each combination of the [CTRL] key and the [F1]-[F5] keys. When you move the cursor to the desired combination and press the [ENTER] key, the corresponding graphic of the [CTRL] key and [F1]-[F5] keys will be highlighted, and will be selected for assignment. B Function list Here you can specify the function that will be assigned to the key combination you selected in (1). The line enclosed by the dotted frame is the currently selected function. The following functions can be assigned. Display Function NO ASSIGN No assignment SHUT DOWN Display the SONG screen/ Shut Down page (shortcut to shutdown)* SONG SAVE Display the SONG screen/ Song List page, and move the cursor to the SAVE button (shortcut to save the current song)* CD LOAD Close the tray of the CD-RW drive and load the CD* CD UNLOAD Open the tray of the CD-RW drive* AUTOMIX Switch automix on (Enable) [ENABLE/DISABLE] or off (Disable)* Display MTC SYNC [MASTER/SLAVE] SCENE NAME SCENE RECALL NO.xx DELAY [ON/OFF] EQ [ON/OFF] DYN [ON/OFF] PEAK HOLD [ON/ OFF] OSCILLATOR [ON/ OFF] Function Switch the AW2816 between MTC master (Master) or MTC slave (Slave)* Display the currentlyrecalled scene name in the upper right of the screen for a fixed length of time Recall scene number xx (use the [DATA/JOG] dial to select xx) Switch delay on/off for the selected channel Switch EQ on/off for the selected channel Switch the dynamics processor on/off for the selected channel Switch peak hold on/off Switch the test tone oscillator on/off * Depending on the operating state of the AW2816, functions marked with an asterisk may not be executed (such as when the transport is running). In such cases, an error message will appear at the bottom of the display. 270 Reference section