Yamaha AW2816 Owner's Manual - Page 270

UTILITY screen Prefer. 3 page Make overall settings for the AW2816 (3) Function Here you can set the internal clock of the AW2816, and specify the backup method for removable media, etc. 1 Key operation 2 • [UTILITY] key ¡ [F4] (Prefer.3) key 3 • Repeatedly press the [UTILITY] key until the screen shown at the right appears. 4 5 Screen functions A CLOCK This area sets the internal clock of the AW2816. Use the [DATA/JOG] dial to set the year (Y), month (M), day (D), hour (h), minute (m), and second (s), and use the SET button to finalize the date and time. If you use the RESET button instead of the SET button, the settings you input will be cancelled, and the previous date and time will reappear. Tip! • When you save a song, date and time data according to this clock will be saved on the hard disk along with the song data. • When the AW2816 is shipped, its internal clock is set to Japan time. B BATTERY This shows the state of the battery that powers the internal clock of the AW2816. If the battery has sufficient capacity remaining, this will indicate "OK." If the battery has run down, this will indicate "LOW." If the "LOW" indication appears, please contact your dealer to have the battery replaced. (A fee will be charged.) C REMOVABLE BACKUP (Removable media backup method) This selects the backup method used when backing up a song on removable media such as MO. Move the cursor to this button and press the [ENTER] key to switch between the following two settings. • TYPE 1 (default setting) This backup method allows the capacity of the removable media to be used to its fullest potential. This method is suitable when you are backing up multiple songs at once. Even if the data does not fit on a single volume of media, you can backup across multiple volumes of media. If this method is selected, the media will be formatted automatically before backup is executed. • TYPE 2 This backup method uses only as much space on the removable media as occupied by the data being backed up. This method is suitable when you are backing up individual songs at a time. As long as there is space remaining on the media, you can back up other songs later. However, it is not possible to backup data that spans multiple volumes of media (as you can using TYPE 1). Before using the TYPE 2 method to back up on a new volume of media, you must format the media. For details on how to back up songs, refer to page 162. 268 Reference section