Yamaha AW2816 Owner's Manual - Page 190

Finalizing a disc If CD-R media was written using Track At Once, data from other stereo tracks can be added as long as the disc has not been finalized. However, media that has not yet been finalized cannot be played on a CD-RW drive or conventional CD player. To make CD-R media playable on a CD player, use the following procedure to finalize it. 1 Press the [CD] key ¡ [F1] key. The CD screen/CD Write page will appear. Make sure that the CD-RW is selected in the DRIVE area located in the upper left of the display. 4 Move the cursor to the FINALIZE button, and press the [ENTER] key. A popup window will ask you to confirm execution of the Finalize operation. 5 To execute the Finalize operation, move the cursor to the OK button and press the [ENTER] key. To cancel without executing, move the cursor to the CANCEL button and press the [ENTER] key. It is not possible to halt the operation while Finalize is being executed. 2 Hold down the [SHIFT] key and press the [F2] key to open the tray of the CD-RW drive, and insert the CD-R media to be finalized into the tray. Hold down the [SHIFT] key and press the [F1] key to close the tray. 3 Move the cursor to the TRACK AT ONCE button, and press the [ENTER] key. The FINALIZE button will appear at the left of the TRACK AT ONCE button. The list in the right side of the display will show the tracks that have been written to the CD-R media. Mastering 12 Operation section 185